Automobile Electronics

In this post I have explained a circuit concept for enabling cars with an add-on automatic safety park light which triggers during night and signals the position of the car and consequently prevents a mistaken collision or dashing by another vehicle. The design ensures minimum consumption and relatively higher brightness for the involved LED lights. […]

In this article I have explained a simple circuit for enabling the turn signal lamp of any car to carry out a two-way function of DRL lights as well as well the stipulated turn lights. The idea was requested by Mr. Artem. Technical Specifications Thank you for your fanaticism with electronics, this is really noticeable […]

In this article I have explained a simple electric scooter circuit design which can be also modified to make an electric auto-rickshaw. The idea was requested by Mr. Steve. The Circuit  Request I was lucky enough to find your blog, really amazing stuff that you’ve managed to design. I’m looking for a DC to DC […]

The circuit presented here is a tester circuit for testing CDIs for motorcycles and three-wheelers.   Designed and Written By: Abu-Hafss Basically there are 2 types of CDIs: Technical Specifications a) AC CDI, in which the HVAC (about 180V) is obtained from the source coil inside the magneto housing. b) DC CDI, in which the […]

The motorcycle regulator, rectifier tester circuit presented here can be used to test a 6-wire shunt type regulator-rectifiers for a 3-phase charging system of motorcycles. These reg./rectifiers (RR-units) are usually sealed with epoxy and it is considered difficult to find out if the unit is faulty or not. Designed and Written by: Abu-Hafss As the […]

In this post I have explained about a 5 simple siren circuits, using Arduino and also with ordinary components such as transistors and capacitors yet is able to produce an alarm sound at an excruciating level. The idea was contributed by “Abu-Hafss” Deeper in the article we also learn to make an advanced Arduino based […]